pinheaders - CAD

Voici une lib a utiliser sous openscad pour générer des pinoches pour simuler en 3d vos montages electroniques

	module Pin_header(pos = [0,0,0],rot = [0,0,0], col = 3, row = 1, horiz = false, female = false)
	{
	plastic_h = female ? 7.0 : 2.5;
	plastic_tz = female ? 3.0 : 5.0;
	metal_h = female ? 2.0 : 10.0;
	metal_b = female ? 3.0 : 5.0;
	translate (pos)
	rotate(rot)
	for (i=[0:abs(col)-1])
	for (j=[0:abs(row)-1])
	{
	translate ([i*2.54*(col/abs(col)),j*2.54*(row/abs(row)),0])
	if (horiz)
	union()
	{
	translate ([0,-1.,5])
	rotate([90,0,0])
	difference()
	{
	union()
	{
	color ([.1,.1,.1])
	linear_extrude( height = plastic_h, center = false, convexity = 10)
	union()
	{
	square(size = 2.4 , center = true);
	if (i<abs(col)-1)
	{
	translate ([1.2,0,0])
	square(size = [1,2] , center = true);
	}
	if (j<abs(row)-1)
	{
	translate ([0,1.2,0])
	square(size = [2,1] , center = true);
	}
	}
	if (female)
	{
	color ([.5,.5,.5])
	translate ([0,0,plastic_h])
	cylinder( $fn = 16, d=1.5, h = .3, center = true);
	}
	}
	if (female)
	{
	color ([.5,.5,.5])
	translate ([0,0,5])
	cylinder( $fn = 16, d=1, h = plastic_h*0.7, center = true);
	}
	}
	color ([.5,.5,.5])
	{
	translate ([0,0,0])
	linear_extrude( height = 5.0, center = false, convexity = 10)
	square(size = 0.6 , center = true);
	translate ([0,.3,5])
	rotate([90,0,0])
	linear_extrude( height = metal_h, center = false, convexity = 10)
	square(size = 0.6 , center = true);
	}
	}
	else
	union()
	{
	translate ([0,0,plastic_tz])
	rotate([00,0,0])
	difference()
	{
	union()
	{
	color ([.1,.1,.1])
	linear_extrude( height = plastic_h, center = false, convexity = 10)
	union()
	{
	square(size = 2.4 , center = true);
	if (i<abs(col)-1)
	{
	translate ([1.2,0,0])
	square(size = [1,2] , center = true);
	}
	if (j<abs(row)-1)
	{
	translate ([0,1.2,0])
	square(size = [2,1] , center = true);
	}
	}
	if (female)
	{
	color ([.5,.5,.5])
	translate ([0,0,plastic_h])
	cylinder( $fn = 16, d=1.5, h = .3, center = true);
	}
	}
	if (female)
	{
	color ([.5,.5,.5])
	translate ([0,0,5])
	cylinder( $fn = 16, d=1, h = plastic_h*0.7, center = true);
	}
	}
	color ([.5,.5,.5])
	{
	translate ([0,0,0])
	linear_extrude( height = metal_h + metal_b, center = false, convexity = 10)
	square(size = 0.6 , center = true);
	}
	}
	}
	}
	Pin_header(pos = [0,20,0],rot = [0,0,0], col = 5, row = 3, horiz = false);
	Pin_header(pos = [0,0,0],rot = [0,0,90],col = 5, row = 1, horiz = true);
	Pin_header(pos = [20,20,0],rot = [0,0,0], col = 5, row = 3, horiz = false, female = true);
	Pin_header(pos = [20,0,0],rot = [0,0,90],col = 5, row = 1, horiz = true , female = true);

view raw Pin_header.scad hosted with ❤ by GitHub